Please fill out the following form to request a quote!
Name:
E-Mail:
Day Phone Number:
Budget:
Completion Date:
ENGINE SPECS:
Enter desired part or leave blank if unsure. Make sure
to check the box for any part(s) supplied!
Engine Make:
(ex. Chevy, Ford, Chrysler, etc.)
Cubic Inch Displacement:
(ex. 350, 351W, 360)
Small Block/Big Block:
Customer Supplied
(ex. SBC, SBF, etc. )
Desired Horsepower:
Desired Usage:
(Street, Strip, Hot Rod, Circle Track,
etc.)
Type Of Block:
Customer Supplied
(OEM, OEM Race, Dart, Aluminum, etc.)
ROTATING ASSEMBLY:
Enter desired part or leave blank if unsure. Make sure
to check the box for any part(s) supplied!
Crank:
Customer Supplied
(ex. Cast, Steel, Billet, etc.)
Rods:
Customer Supplied
(ex. H Beam, I Beam, Billet, Aluminum,
etc.)
Pistons:
Customer Supplied
(ex. Cast, Hyper Utetic, Forged, etc.
)
Pins:
Customer Supplied
(ex. Steel or Tool Steel, etc. )
Rings:
Customer Supplied
(ex. Cast Iron, Molly, Tool Steel,
etc. )
Bearings:
Customer Supplied
(ex. Super Duty, Alloy, Copper, etc.
)
Balancer:
Customer Supplied
(ex. OEM, SFI, Fluid, etc.)
Flex Plate/Flywheel:
Customer Supplied
(ex. OEM, SFI, Flywheel, etc. )
Oil Pump:
Customer Supplied
(ex. Wet sump, Dry Sump, etc.)
Oil Pump Drive Rod:
Customer Supplied
(ex. OEM, hardened, etc.)
Other:
Customer Supplied
(ex. Rod bolts, balancer bolt, etc.)
VALVE TRAIN:
Enter desired part or leave blank if unsure. Make sure
to check the box for any part(s) supplied!
Cam Shaft:
Customer Supplied
(ex. Hydraulic, Solid, Hydraulic Roller,
etc.)
Lifters:
Customer Supplied
(ex. Hydraulic, Solid, Hydraulic Roller,
etc.)
Push Rods:
Customer Supplied
(ex. OEM, Chrome Molly, Hardened,
etc.)
Rocker Arms:
Customer Supplied
(ex. OEM, roller tip, full roller,
etc.)
Shaft Rockers:
Customer Supplied
Stud Girdle:
Customer Supplied
Timing Chain:
Customer Supplied
(ex. OEM, double roller, belt drive,
etc. )
Other:
Customer Supplied
(ex. Cam button, distributor gear,
cam bolts, etc. )
CYLINDER HEADS:
Enter desired part or leave blank if unsure. Make sure
to check the box for any part(s) supplied!
Heads:
Customer Supplied
(ex. OEM, OEM Perf, Dart, Aluminum,
RHS, etc.)
Intake Valves:
Customer Supplied
(ex. 1.94, 2.02, etc.)
Exhaust Valves:
Customer Supplied
(ex. 1.50, 1.60, etc.)
Springs:
Customer Supplied
(ex. Single, Beehive, Double, etc.)
Retainers:
Customer Supplied
(ex. OEM, Chrome Molly, Titanium,
etc.)
Valve Locks:
Customer Supplied
(ex. 7 degree, 10 degree, etc.)
Screw-In Studs:
Customer Supplied
(ex. 3/8, 7/16, etc.)
Guide Plates:
Customer Supplied
Spring Shims:
Customer Supplied
Valve Guide Seals:
Customer Supplied
FASTENERS:
Enter desired part or leave blank if unsure. Make sure
to check the box for any part(s) supplied!
Main Bolts/Studs:
Customer Supplied
Head Bolts/Studs:
Customer Supplied
Oil Pan Bolts:
Customer Supplied
Timing Cover:
Customer Supplied
Rod Bolts:
Customer Supplied
Intake:
Customer Supplied
INDUCTION SYSTEM:
Enter desired part or leave blank if unsure. Make sure
to check the box for any part(s) supplied!
Intake Manifold:
Customer Supplied
(ex. Dual Plane, Single Plane, Tunnel
Ram, etc.)
Carburetion:
Customer Supplied
(ex. Spread bore, Square bore, dominator,
etc.)
Fuel Injection:
Customer Supplied
(ex. TBI, Direct Port, etc.)
Fuel Pump:
Customer Supplied
(ex. Mechanical, Electric, etc.)
POWER ADDERS:
Enter desired part or leave blank if unsure. Make sure
to check the box for any part(s) supplied!
Nitrous Oxide:
Customer Supplied
(ex. Dry/Wet, HP desired)
Turbo:
Customer Supplied
(ex. Single, Twin)
Blower:
Customer Supplied
(ex. 174, 671, 871, etc.)
ACCESSORIES:
Enter desired part or leave blank if unsure. Make sure
to check the box for any part(s) supplied!
Oil Pan:
Customer Supplied
(ex. OEM, large sump, etc.)
Timing Cover:
Customer Supplied
(ex. OEM, Chrome, 2 Piece, etc.)
Valve Covers:
Customer Supplied
(ex. OEM, Chrome, Aluminum, etc.)
Distributor:
Customer Supplied
(ex. OEM, HEI, magnetic pick-up, etc.)
Ignition:
Customer Supplied
(ex. Electronic, Magnito, etc.)
Wires:
Customer Supplied
(ex. OEM, 8mm, 8.5mm, shielded, etc.)
Wire Looms:
Customer Supplied
(ex. Clip on, Bolt on, Billet, etc.)
Water Neck:
Customer Supplied
(ex. OEM, swivel, etc. )
Water Pump:
Customer Supplied
(ex. Cast, Aluminum, etc.)
Dry Sump Tank:
Customer Supplied
Pulley System:
Customer Supplied
(ex. V system, Serpentine, etc.)
Radiator:
Customer Supplied
(ex. Copper, Aluminum, etc.)
Fans:
Customer Supplied
(ex. Mechanical, Electric, etc.)
Linkage:
Customer Supplied
(ex. Kick-down, cable, rod, etc.)
Brackets:
Customer Supplied
(ex. Kick-down, throttle, alternator,
etc.)
Alternator:
Customer Supplied
(ex. 1 wire, 100amp, 170amp, etc.)
Others:
Customer Supplied
Comments:
